l It should be noted that the computation was done with a 20 Hhz, 80386
209;based microcomputer equipped with a 80387 math co‑processor.
l The computer programs used for the analyses, one based on the xx method and the other based on the new method, were written in FORTRAN with a compiler that supports the math co‑processor.
l Lisp, Prolog give maximum flexibility but also maximizes development time.
l Internal representation is the way a model is represented in the computer.
l An interactive menu-driven procedure is used in this study
l Shell can be develop very fast at the cost of time fairly severe limitations.
l While there is no measurable saving of time for the case involving five criteria, the saving is dramatic for the case involving 10 criteria -- the computation time reduces from 10 hr 40 min to about 1 min.
l This combination is being implemented in an objected‑oriented programming environment (Smalltalk‑80 system) to solve problems encountered in construction xxx.
Method / Approach / Study / Process Model / Equation /Algorithm / Rule / Formula / Technique
l A discussion is presented of a problem-solving system
l To improve the efficiency of the method, the following approach may be applied.
l In order to an investigation was made to find the causes of the
l Although large collections of rules and equations have been complied, none are generally accepted
l This approach will be explained and discussed thoroughly in the body of the report.
l This can be accomplished by
l This algorithm to compute the total cost can be described step by step as follows:
l The above preliminary analysis has provided important information
l Various methods have been proposed for selecting an optimum...
l These concepts have been applied to
l On the basis of the concept mentioned above,
l This can be achieved by
l This fact s
<< 上一页 [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] ... 下一页 >>